ESXi 5.0
NetAppNasPlugin.v18.zip installieren
esxcli software vib install -d /path/to/NetAppNasPlugin.v18.zip
reboot Hosts

Mssen auf 1 stehen
esxcfg-advcfg -g /DataMover/HardwareAcceleratedMove
esxcfg-advcfg -g /DataMover/HardwareAcceleratedInit

Netapp VSC 4.0
Monitoring and Host Configuration -> Tools -> Install VAAI Plugin on Hosts
Es werden Optionen auf der Netapp gesetzt:"
 nfs.v4.enable on
 nfs.vstorage.enable on
Reboot Hosts

Auf Host
Configuration -> Storage -> NFS Volume von Netapp mit ONTAP 8.1.1 mounten
"Hardware Acceleration" muss auf supported stehen

CLI
vmkfstools -Ph /vmfs/volumes/<DataStore>
NAS VAAI Supported: YES
Is Native Snapshot Capable: YES


Storage vMotion anstoen

auf dem ESXi darf dabei keine groe Last ber die Nics gehen.
Netapp Test ob VAAI genutzt wird:
netapp> nfs vstorage stats
NFS COL counters are :
                     Copy Reqs: 1
                    Abort Reqs: 0
                   Status Reqs: 57
                   Notify Reqs: 1
                   Revoke Reqs: 0
                 Invalid Parms: 0
        Authorization Failures: 0
       Authentication Failures: 0
               Copy Fail ISDIR: 0
             Copy Fail OFFLINE: 0
               Copy Fail STALE: 0
                  Copy Fail IO: 0
             Copy Fail NOSPACE: 0
           Copy Fail DISKQUOTA: 0
            Copy Fail READONLY: 0
               Copy Fail OTHER: 0
                Intravol Moves: 0
                Intervol Moves: 1
                Fail Space RES: 0
                    SCE Copies: 0
                    BCE Copies: 1
                 Active Copies: 1
				 
Disks und CPU auf der Netapp werden ziemlich beantsprucht...